Advances in thermal engineering, manufacturing, and production management : select proceedings of ICTEMA 2020 / editors, Sadhan Kumar Ghosh [et al.]

Format
Book
Language
English
Published/​Created
  • Singapore : Springer, [2021]
  • ©2021
Description
1 online resource (xvii, 404 pages) : illustrations (some color)

Details

Subject(s)
Editor
Series
Lecture notes in mechanical engineering. [More in this series]
Source of description
Description based on print version record.
Contents
  • Intro
  • Organizing Committee
  • Preface
  • Contents
  • About the Editors
  • Numerical Analysis of Heat Transfer Characteristics Under Single-Jet Air Impingement
  • 1 Introduction
  • 2 Numerical Analysis
  • 2.1 Mathematical Model
  • 2.2 Geometry
  • 2.3 Solver
  • 3 Results and Discussion
  • 3.1 Effect of Turbulence Models
  • 3.2 Effect of Turbulent Prandtl Number
  • 3.3 Effect of Near Wall Functions
  • 4 Conclusion
  • References
  • Effect of Liquid Bridge Volume on Cohesive Sediment Motion
  • 2 Model Frameworks and Freebody Diagram
  • 3 Escape Velocity Calculations
  • 3.1 Input Parameters of the Model
  • 4 Results and Discussion
  • 5 Conclusions
  • Boiling Behavior of Iso-Butane on a Horizontal Plain Tube
  • 2 Experimental Apparatus
  • 3 Results and Discussions
  • 4 Conclusions
  • MHD Thermal Convection of Nanofluid Saturated Porous Cavity Heated Linearly
  • 2 Problem Formulation
  • 2.1 Problem Descriptions
  • 2.2 Numerical Technique
  • 3 Result and Discussions
  • 3.1 Effect of Different Rayleigh Number (Ra)
  • 3.2 Effect of Darcy Number (Da)
  • 3.3 Impact of Hartmann Number (Ha)
  • 3.4 Effect of Nanoparticle Concentration (ϕ)
  • 3.5 The Heat Transfer Characteristics (Nu)
  • Natural Convection of Copper-Water Nanofluid in a Square Enclosure with an Isothermal Protruding Heater
  • 2 Mathematical Formulation
  • 3 Numerical Scheme and Validation
  • 4.1 Influence of Nanoparticle Volume Fraction on Vertical Velocity and Temperature Profiles
  • 4.2 Influence of Nanoparticle Volume Fraction on Streamline and Isotherm Contours
  • 4.3 Influence of Nanoparticle Volume Fraction on Average Nusselt Number
  • 5 Conclusion
  • References.
  • Numerical Analysis of Micro-Scale Diffusion Flame Structure Using Methane Gas as Fuel
  • 2 Numerical Model and Adopted Numerical Scheme
  • 2.1 Numerical Model and Adopted Numerical Scheme
  • 2.2 Governing Equations
  • 2.3 Results and Discussions
  • 3 Conclusion
  • Effect of Different Surface Types of Loading Vessel Wall on Combustion Performance of a Domestic LPG Cook Stove
  • 2 Numerical and Experimental Methodology
  • 3.1 Grid Independency Test and Model Validation
  • 3.2 Velocity and Temperature Distributions
  • 3.3 Effect of Surface Types of the Loading Vessel Wall
  • Low-Velocity Impact Analysis of Pre-twisted Composite Sandwich Shallow Conical Shells in Hygrothermal Environment
  • 2 Theoretical Formulations
  • 2.1 Governing Equations
  • 2.2 Contact Law
  • 3.1 Comparisons
  • 3.2 Influence of Cone Length-to-Thickness Ratio
  • 3.3 Influence of Initial Impact Velocity
  • Mixed Convection Condensation of Vapor with Non-condensable Gas Over a Vertical Plate: ODE-Based Integral Solution
  • 2 Mathematical Modeling
  • 2.1 Physical Model Detailing
  • 2.3 ODE Systems with Eight ODEs
  • 3.1 Validation of Model
  • 3.2 Interface Temperature and Interface Concentration Profile
  • 3.3 Effect of Free Stream Non-condensable Gas Concentration
  • Magneto-Convective Heat Transfer in a Cavity Under Partial Magnetic Fields
  • 3 Result and Discussion
  • 3.1 Impact of Rayleigh Number (Ra)
  • 3.2 Impact of Magnetic Field Strength (Ha).
  • 3.3 Impact of Length of the Applied Magnetic Field (LB)
  • 3.4 Effect of Different Prandtl Number (Pr)
  • 3.5 Heat Transfer Analysis
  • MHD Convection in Cavity Under Partially Applied Magnetic Fields
  • 3.1 Effect of the Partially Applied Magnetic Field
  • 3.2 Effect of Different Positions in the Cavity
  • 3.3 Comparison of Length of Partial Magnetic Field (LB) Over Whole Length Magnetic Field with Varying Hartmann Number (Ha)
  • 3.4 Heat Transfer Analysis
  • Comparison of Thermo-Hydraulic Performance Enhancement of Liquid He-Based Cryogenic Nanofluid Flow in Turbulent Region Through Rectangular Plate Fin Heat Exchangers
  • 2.1 Physical Description of the Model
  • 2.3 Thermophysical Properties of Nanofluid
  • 2.4 Boundary Conditions
  • 2.5 Meshing and Model Setup
  • 2.6 Grid-Independency
  • 2.7 Experimental Validation of the Model
  • Performance Study of a Small Capacity Thermoacoustic Refrigerator Using DELTA EC Software
  • 2 Working Principle
  • 3 Mathematical Formulation
  • 4 DELTAEC Simulations and Results
  • 4.1 Stack Spacing
  • 4.2 Frequency
  • 4.3 Pressure Amplitude
  • 4.4 Mass Flow Rate and Tube Size
  • Shifting the Focus from Macro- to Micro-waste to Energy (WTE) Plants as a Solution to the Solid Waste Management
  • 2 Literature Review
  • 3 Prevalent WTE Technologies
  • 3.1 Biochemical Conversion
  • 3.2 Anaerobic Digestion (AD)
  • 3.3 Fermentation
  • 3.4 Thermo-Chemical Conversion
  • 3.5 Combustion/incineration
  • 3.6 Gasification
  • 3.7 Pyrolysis.
  • 4 Challenges in Macro-Level WTE Plants
  • 5 Concept of Micro-generation of Power
  • 6 Necessity of Micro-level WTE Plants
  • 7 Conclusions
  • Design and Performance Evaluation of Box-Type Solar Cooker with Energy Storage
  • 2 Proposed Design
  • 2.1 Description of the Proposed Box-Type Solar Cooker
  • 2.2 Operation of Box-Type Solar Cooker with Phase Change Material
  • 2.3 Thermal Analysis of Proposed Design
  • 3 Experimental Setup and Instrumentation
  • 3.1 Experimental Procedure
  • 3.2 Experimental Result and Discussion
  • 3.3 Cooking of Foods in Standard Cooker and PCM-Cooker
  • A Proposal for Harnessing an Alternative Source of Renewable Energy
  • 2 Underlying Basis of the Proposal
  • 2.1 Materials and Arrangements
  • 2.2 Biofuel: an Alternative of Petrochemical Industry
  • 2.3 Theoretical Estimation of Energy
  • 2.4 Banana Peel and Bioethylene
  • 3.1 Working Principle
  • 3.2 Possible Application Sites
  • Energy-Efficient Cooling Scheme of Power Transformer: An Innovative Approach Using Solar and Waste Heat Energy Technology
  • 2 Literature Survey
  • 3 Necessity of Cooling for Transformer
  • 3.1 Mathematical Form to Determine Transformer Temperature Level
  • 4 Evolution in Transformer Cooling Techniques
  • 5 Design and Fabrication of the Proposed System
  • 6 Algorithm
  • 7 Future Scope
  • 7.1 Salient Features
  • 7.2 Future Challenges
  • 8 Conclusion
  • Investigation of a Solar Concentrator for Water Distillation
  • 2 Dish Solar Concentrator and Receivers
  • 3 Experimental Study
  • 3.1 Set-up
  • 3.2 Thermal Profiles
  • Floating Photovoltaic Plant in India: Current Status and Future Prospect.
  • 2 FPV Technology
  • 2.1 Major Components
  • 2.2 Benefits of FPV Plant
  • 2.3 Challenges
  • 3 Global Scenarios
  • 4 FPV Plant in India
  • 4.1 Present Status
  • 4.2 Projects Under Development
  • 4.3 Recent Projects Proposal
  • 5 Future Prospect
  • 6 Conclusion and Remarks
  • Friction Coefficient Analysis of Nano-crystalline TiO2-Added Alumina Ceramics
  • 2 Materials and Methodology
  • 2.1 Materials
  • 2.2 Synthesis of Nano-crystalline TiO2Powder
  • 2.3 Densification
  • 2.4 Tribological Testing
  • 3.1 Computation of Frictional Coefficient in Relation with Sliding Frequency and Normal Load
  • 3.2 Validation of the Proposed Algorithm
  • Thermal and Rheological Behaviour of a Wax Based Binder and an Alumina Feedstock for Micro-PIM Application
  • 2 Materials Used
  • 3 Experimental Procedure
  • 4.1 Thermogravimetry Analysis (TGA)
  • 4.2 Differential Scanning Calorimetry (DSC)
  • 4.3 Specific Heat (Cp) and Latent Heat of Solidification
  • 4.4 Thermal Diffusivity and Conductivity
  • 4.5 Rheology of Binder
  • 4.6 Rheology of Feedstock
  • 4.7 Component Development
  • Alumina Based Cutting Tools-A Review
  • 2 Some Initial Breakthroughs and Development
  • 2.1 Machining of Alumina-Boron Carbide (Composite) Cutting Tool
  • 2.2 Machining Detail of Silicon-Carbide Whisker Reinforced Cutting Tool
  • 2.3 Machining Detail of Zirconia Toughened ACT
  • 2.4 Machining Details of ACTs on Ultra High Strength Steel
  • 3 Performance of Some Important ACTs
  • 4 Performance on Specifically Steel Work-Pieces
  • 5 Performance on Specific Alloy Based Materials
  • 6 Modern Fabrication and Coating
  • Deposition of Duplex and Multilayer Electroless Ni-P/Ni-B Coating and Study of Their Wear Resistance.
ISBN
981-16-2347-3
OCLC
1259680998
Statement on language in description
Princeton University Library aims to describe library materials in a manner that is respectful to the individuals and communities who create, use, and are represented in the collections we manage. Read more...
Other views
Staff view

Supplementary Information